LC86P6560 Datasheet, PDF (18/22 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller with One-Time Programmable PROM

LC86P6560
Table 1. Ceramic resonator oscillation guaranteed constant (main clock)
Oscillation type
Maker
Oscillator
C1
C2
6MHz ceramic resonator
Murata
CSA6.00MG
oscillation
CST6.00MGW
Kyocera
KBR-6.0MSB
PBRC6.00A (chip type)
To be determind
KBR-6.0MKC
PBRC6.00B (chip type)
3MHz ceramic resonator
Murata
CSA3.00MG
oscillation
CST3.00MGW
Kyocera
KBR-3.0MS
* Both C1 and C2 must use K rank (±10%) and SL characteristics.
Table 2. Crystal oscillation recommended constant (sub clock)
Oscillation type
Maker
Oscillator
C3
C4
Rf
Rd
32.768kHz crystal oscillation
* Both C3 and C4 must use J rank (±5%) and CH characteristics.
(It is about the application, which is not in need of high precision. Use K rank (±10%) and SL characteristics.)
(Notes) •Since the circuit pattern affects the oscillation frequency, place the oscillation-related parts as close
to the oscillation pins as possible with the shortest possible pattern length.
•If you use other oscillators herein, we provide no guarantee for the characteristics.
CF1
CF2
CF
C1
C2
Figure 1 Ceramic oscillation circuit
XT1
C3
XT2
Rf
Rd
X’tal
C4
Figure 2 Crystal oscillation circuit
No.6691-18/22