|
LC86P6560 Datasheet, PDF (13/22 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller with One-Time Programmable PROM | |||
|
◁ |
LC86P6560
3. Electrical Characteristics at Ta=-30°C to +70°C, VSS1=VSS2=0V
Parameter Symbol
Pins
Conditions
Ratings
unit
VDD[V] min. typ. max.
Input high
IIH(1) Ports 0,3 of open â¢Output disable
4.5-6.0
5
µA
current
drain output
â¢VIN=13.5V
(including the off-
leak current of the
output Tr.)
IIH(2) â¢Port 0 without
â¢Output disable
4.5-6.0
1
pull-up MOS Tr. â¢Pull-up MOS Tr.
â¢Ports 1,3
OFF. VIN=VDD
(including the off-
leak current of the
output Tr.)
IIH(3) â¢Ports 70,71,72,73 â¢Output disable
4.5-6.0
1
â¢Port 8
â¢VIN=VDD
(including the off-
leak current of the
output Tr.)
IIH(4) RES
VIN=VDD
4.5-6.0
1
IIH(5) Ports 74 ,75
VIN=VDD
4.5-6.0
1
IIH(6) â¢S32 to S51
â¢Output P-channel
4.5-6.0
1
without pull-down Tr. OFF
resistor
â¢VIN=VDD
Input low
IIL(1) â¢Ports 1,3
â¢Output disable
4.5-6.0 -1
current
vPort 0 without
â¢Pull-up MOS
pull-up MOS Tr.
Tr. OFF. VIN=VSS
(including the off-
leak current of the
output Tr.)
IIL(2) â¢Ports 70,71,72,73 â¢Output disable
4.5-6.0 -1
â¢Port 8
â¢VIN=VSS
(including the off-
leak current of the
output Tr.)
IIL(3) RES
VIN=VSS
4.5-6.0 -1
IIL(4) Ports 74 ,75
VIN=VSS
4.5-6.0 -1
Output high VOH(1) Ports 0,1,3 of
IOH=-1.0mA
4.5-6.0 VDD-1
V
voltage
VOH(2) CMOS output
IOH=-0.1mA
4.5-6.0 VDD-0.5
VOH(3) S0/T0 to S15/T15 IOH=-20mA
4.5-6.0 VDD-1.8
VOH(4)
â¢IOH=-1mA
4.5-6.0 VDD-1
â¢The current of any
unmeasurement pin
is not over 1mA.
VOH(5) S16 to S51
IOH=-5mA
4.5-6.0 VDD-1.8
VOH(6)
The current of any
4.5-6.0 VDD-1
unmeasurement pin is
not over 1mA.
Output low VOL(1) Ports 0, 1, 3
IOL=10mA
4.5-6.0
1.5
voltage
VOL(2)
IOL=1.6mA
4.5-6.0
0.4
VOL(3) Port 70
IOL=1mA
4.5-6.0
0.4
VOL(4) â¢Ports 71,72,73
IOL=1.6mA
4.5-6.0
0.4
â¢Ports 84,85,86,87
Pull-up MOS Rpu
â¢Ports 0, 1, 3
VOH=0.9VDD
4.5-6.0 15
40
70 Kâ¦
Tr. resistor
Continue.
No.6691-13/22
|
▷ |