LC86P6560 Datasheet, PDF (15/22 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller with One-Time Programmable PROM

LC86P6560
5. Pulse Input Conditions at Ta=-30°C to +70°C, VSS1=VSS2=0V
Parameter Symbol
Pins
Conditions
Ratings
unit
VDD[V] min. typ. max.
High/low level tPIH(1) •INT0, INT1
•Interrupt acceptable 4.5-6.0 1
tCYC
pulse width tPIL(1) •INT2/T0IN
•Timer0-countable
tPIH(2) INT3/T0IN
•Interrupt acceptable 4.5-6.0 2
tPIL(2) (The noise rejection •Timer0-countable
clock is selected to
1/1.)
tPIH(3) INT3/T0IN
•Interrupt acceptable 4.5-6.0 32
tPIL(3) (The noise rejection •Timer0-countable
clock is selected to
1/16.)
tPIH(4) INT3/T0IN
•Interrupt acceptable 4.5-6.0 128
tPIL(4) (The noise rejection •Timer0-countable
clock is selected to
1/64.)
tPIL(5) RES
Reset acceptable
4.5-6.0 200
µs
6. AD Converter Characteristics at Ta=-30°C to + 70°C, VSS1=VSS2=0V
Parameter
Symbol
Pins
Resolution
Absolute precision
(Note 2)
Conversion time
N
ET
tCAD
Analog input
voltage range
Analog port
input current
VAIN AN0 to AN7
IAINH
IAINL
Conditions
Ratings
unit
VDD[V] min. typ. max.
4.5-6.0
8
bit
4.5-6.0
±1.5 LSB
AD conversion time =
16 × tCYC
(ADCR2=0)
(Note 3)
AD conversion time =
32 × tCYC
(ADCR2=1)
(Note 3)
4.5-6.0 15.68
(tCYC=
0.98µs)
31.36
(tCYC=
0.98 µs)
4.5-6.0 VSS
65.28 µs
(tCYC=
4.08µs)
130.56
(tCYC=
4.08µs)
VDD V
VAIN=VDD
VAIN=VSS
4.5-6.0
4.5-6.0 -1
1
µA
(Note 2) Absolute precision excepts quantizing error (±1/2 LSB).
(Note 3) The conversion time means the time from executing the AD conversion instruction to setting the complete digital
conversion value to the register.
No.6691-15/22