LA9250M Datasheet, PDF (14/17 Pages) Sanyo Semicon Device – CD Player Analog Signal Processor (ASP)

LA9250M
10. Focus Detection
The pickup is seen as being in focus when, after a VR + 0.2 V level is detected in the focus error signal S-curve, that
S-curve next goes to the VR level.
REF + 0.2 V
Focus
A11269
11. Defect Detection
The mirror surface level is held by the capacitor on LF2 (pin 59), and DEF (pin 51) goes high if a drop in the EFM
signal (RF output) exceeds about 0.35 V. When DEF goes high, the tracking servo goes to THLD mode. When a
defect is detected applications can prevent the LA9250M from going to THLD mode either by setting DEF to low or
by setting LF2 (pin 59) low and thus setting the LA9250M not to output DEF.
EFM signal
(RFSM output)
LF2 (pin 59)
0.35 V
DEF (pin 51)
A11270
12. Oscillator Circuit
The oscillator frequency is set by the external RC circuit attached to OSC (pin 31). This oscillator frequency is used
as the reference clock for focus search and E/F balance adjustment.
No. 5981-14/17