LC9998G Datasheet, PDF (11/11 Pages) Sanyo Semicon Device – 1/5 Optical Size PAL Color Solid-State Image Sensor

LC9998G
4. Storage
• Do not allow sunlight or other bright light to fall on CCD sensors for extended periods.
• Since harsh conditions such as high temperatures or high humidities can adversely influence device characteristics,
do not use or store these devices in environments with such conditions. Samples should be stored in places where
the temperature and humidity fall in normal ranges, i.e., 5 to 35°C and 45 to 75% RH.
• Since CCD sensors are precision optical components, they should not be subjected to mechanical shocks.
• Avoid locations with corrosive atmospheres or high dust levels.
• Avoid locations subject to rapid temperature changes.
• Do not place heavy objects on top of boxes containing CCD sensors during storage.
• Use materials that cannot accumulate static charges for containers used to hold samples.
• Do not subject magazines holding CCD sensors to mechanical shocks, since this could adversely influence
reliability during mounting due to pin bending and other problems.
5. Notes on Mounting
• Flare can occur if a lens with an optical size larger than 1/5" is used. Consult your Sanyo sales representative in
advance when selecting lenses.
• This product is mounted in a fully transparent plastic package, and is easily influenced by light that passes through
the mounting board from the back to the front. Design end-products to adequately block out extraneous light.
6. Shipping
• Do not drop or throw packages containing CCD sensors.
• Do not allow packages containing CCD sensors to become wet due to rain or snow.
• Protect packages containing CCD sensors from mechanical shock and vibration as much as possible during
shipping.
s No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace
equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of
which may directly or indirectly cause injury, death or property loss.
s Anyone purchasing any products described or contained herein for an above-mentioned use shall:
ΠAccept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and
distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all
damages, cost and expenses associated with such use:
 Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on
SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees
jointly or severally.
s Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for
volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied
regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of February, 1996. Specifications and information herein are subject to
change without notice.
PS No.5219-11/11