LV24230LS Datasheet, PDF (1/17 Pages) Sanyo Semicon Device – Compact Portable Equipment 1-Chip FM Tuner IC

Ordering number : ENA1989
LV24230LS
Bi-CMOS LSI
Compact Portable Equipment
1-Chip FM Tuner IC
Overview
The LV24230LS is an I²C-controlled single-chip FM tuner IC that integrates external components which are necessary for
tuning in a compact VQLP package with dimensions of only 3.5×3.5×0.85mm³. Equipped with a state machine, the
LV24230LS has the capability to perform automatic tuning/seek and dissipates less power than conventional
LV24000series tuner ICs.
Features
• FM FE
• FM IF
• MPX stereo decoder
• Tuning
• Standby
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Maximum input voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCC max
VDD max
VIN1 max
VIN2 max
Pd max
Topr
Tstg
Conditions
Analog block supply voltage
Digital block supply voltage
SCL, SDA, Int
External_clk_in
Ta ≤ 70°C
Ratings
Unit
5.0
V
4.0
V
VDD+0.3
V
VDD+0.3
V
140
mW
-20 to +70
°C
-40 to +125
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
O1211 SY 20080801-S00007 No.A1989-1/17