LC7940YD Datasheet, PDF (1/11 Pages) Sanyo Semicon Device – Dot-matrix LCD Drivers

Ordering number: EN 6158
CMOS IC
LC7940YD,7941YD
Dot-matrix LCD Drivers
Overview
Package Dimensions
The LC7940YD and LC7941YD are segment driver ICs
for driving large, dot–matrix LCD displays. They read 4–
bit parallel or serial input, display data from a controller
into an 80–bit latch, and then generate LCD drive signals
corresponding to that data.
The LC7940YD and LC7941YD feature mirror–image pin
assignments, allowing them to be used together to increase
component density. They are designed to be used with the
LC7942YD common driver to drive large LCD panels.
unit: mm
3180–QIP100D
0.575
80
81
[LC7940YD, LC7941YD]
23.2
20.0
0.65
0.3
1.6
0.15
51
50
Features
• 80 built–in LCD display drive circuits
• 1/8 to l/128display duty cycle
• Serial or 4–bit parallel data input
• Chip disable for low power dissipation for large–sized
panels
• Bias supply voltags can be supplied externally
• Operating supply voltage and ambient temperature
- 2.7 to 5.5 V logic supply ( V_DD) at Ta = –20 to +85°C
- 8 to 20V LCD supply (V_DD – V_EE ) at Ta = –20 to
+85 °C
• CMOS process
• 100–pin flat plastic package
100
1
31
30
2.15
21.6
0.8
SANYO : QFP100D (QIP100D)
Specifications
Absolute Maximum Ratings at Ta = 25 ± 2°C, V_SS = 0 V
Parameter
Logic supply voltge
LCD supply voltage, See Note below.
Input voltage
Symbol
Ratings
Unit
V_DD max
–0.3 to +7.0
V
V_DD – V_EE max
0 to 22
V
V_I max
–0.3 to V_DD + 03
V
s Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
s SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co., Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
63099RM (ID) No. 6158—1/11