QTE Datasheet, PDF (5/8 Pages) Samtec, Inc – 0,80 mm (.0315”) Q Strip® High Speed Ground Plane Socket / Terminal Strips

Product Specification
Series: QSE / QTE 0,80 mm (.0315”) Q Strip^® High Speed Ground Plane Socket / Terminal Strips
7.0 PROCESSING RECOMMENDATIONS
7.1 Mating Alignment Requirements:
7.1.1 The parts can be rigidly misaligned by no more than .004” (0,10 mm) in the X- and .004” (0,10 mm)
in the Y-direction to ensure a good mate.
7.2 Mating Angle Requirements: The connector can be zippered in the longitudinal direction only.
7.2.1
7.2.2
Revision: C
Date: November 11, 2015
Page 5
© Samtec, Inc.