BU7150NUV_15 Datasheet, PDF (7/22 Pages) Rohm – Headphone Amplifier Designed for 0.93V Low Voltage Operation

BU7150NUV
●Application Circuit
Technical Note
・Resistors RF1, RF2 should be used in 20kΩ～1MΩ range.
・For gain setting greater than 4 times, then RC1, RC2, CC1, CC2 can be eliminated.
Fig. 34 Single-ended mode application circuit
・Resistors RF1, RF2 should be used in 20kΩ～1MΩ range
Fig. 35 BTL mode application circuit
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
7/18
2015.1 - Rev.E