BU24033GW_16 Datasheet, PDF (7/25 Pages) Rohm – u - step System Lens Driver for Digital Still Cameras

BU24033GW
●Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Power Supply Voltage
DVDDIO
DVDD
MVCC
Limit
-0.3 to +4.5
-0.3 to +7.0
Input Voltage
VIN
-0.3 to supply voltage+0.3
Input / Output Current ^*1
IIN
+500
+600
+50
Storage Temperature Range
TSTG
-55 to +125
Operating Temperature Range TOPE
-20 to +85
Permissible Dissipation ^*2
PD
1000
*1 Must not exceed PD.
*2 To use at a temperature higher than Ta=25 C, derate 10mW per 1 C
(At mounting 50mm x 58mm x 1.75mm glass epoxy board.)
Unit
Remark
V
V
MVCC12, MVCC34, MVCC5,
VDDAMP
V
mA MVCC12, MVCC34, RNF6
mA MVCC5
mA by PIOUT pin
℃
℃
mW
●Recommended Operating Rating (Ta=25℃)
Parameter
Symbol
I/O Power Supply Voltage
DVDDIO
Digital Power Supply Voltage
DVDD
Driver Power Supply Voltage
MVCC
Clock Operating Frequency
FCLK
Limit
1.62 to 3.6
2.7 to 3.6
2.7 to 5.5
1 to 28
Unit
Remark
V
V DVDD≦MVCC
V
MVCC12, MVCC34, MVCC5,
VDDAMP
MHz Reference clock
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
7/21
TSZ02201-0M3M0BC16060-1-2
20.May.2016 Rev.003