BU7411G Datasheet, PDF (3/5 Pages) Rohm – SILICON MONOLITHIC INTEGRATED CIRCUIT

3/4
○Physical Dimensions
BU7411G(SSOP5) (Unit：[mm])
○Block diagram
IN+ ₁
＋
VSS ₂
－
IN- 3
G:SSOP5
5 ^VDD
4 ^OUT
BU7411SG(SSOP5) (Unit：[mm])
○Pin No.・Pin Name
Pin No.
1
2
3
4
5
Pin Name
IN+
VSS
IN-
OUT
VDD
○Application example
(1) Absolute maximum ratings
Absolute maximum ratings are the values which indicate the limits,
within which the given voltage range can be safely charged to the terminal.
However, it does not guarantee the circuit operation.
(2) Applied voltage to the input terminal
For normal circuit operation of operational amplifier, please input voltage for its
input terminal within input common mode voltage VDD+0.3[V].
Then, regardless of power supply voltage,VSS-0.3[V] can be applied to input
terminals without deterioration or destruction of its characteristics.
(3) Operating power supply (split power supply/single power supply)
The operational amplifier operates if a given level of voltage is applied between VDD and
VSS. Therefore, the operational amplifier can be operated under single power supply
or split power supply.
(4) Power dissipation (pd)
If the IC is used under excessive power dissipation. An increase in the chip temperature will cause
deterioration of the radical characteristics of IC.
For example, reduction of current capability. Take consideration of the effective power dissipation and
thermal design with a sufficient margin. Pd is reference to the provided power dissipation curve.
(5) Short circuits between pins and incorrect mounting
Short circuits between pins and incorrect mounting when mounting the IC on a printed circuits board,
take notice of the direction and positioning of the IC.
If IC is mounted erroneously, It may be damaged. Also, when a foreign object is inserted between
output, between output and VDD terminal or VSS terminal which causes short circuit, the IC may be damaged.
REV. D