BU9796AFS-E2 Datasheet, PDF (13/32 Pages) Rohm – Standard LCD Segment Driver

BU9796Axxx Series MAX 80 segments (SEG20×COM4)
Datasheet
●Detailed command description
D7 (MSB) is bit for command or data judgment.
Refer to Command and data transfer method.
C: 0: Next byte is RAM write data.
1: Next byte is command.
○Display control (DISCTL)
MSB
D7 D6 D5 D4 D3 D2
C
0
1 P4 P3 P2
LSB
D1 D0
P1 P0
Set Power save mode FR
Power save mode FR
P4
P3 Reset initialize condition
Normal mode (80Hz)
0
0
○
Power save mode1 (71Hz)
0
1
Power save mode2 (64Hz)
1
0
Power save mode3 (50Hz)
1
1
* Power consumption is reduced in the follow order:
Normal mode > Power save mode1 > Power save mode2 > Power save mode3
Set LCD drive waveform
Setup
P2 Reset initialize condition
Line inversion
0
○
Frame inversion
1
* Power consumption is reduced in the follow order: Line inversion > Frame inversion
Refer to LCD drive waveform
Set Power save mode SR
Setup
P1
P0 Reset initialize condition
Power save mode1
0
0
Power save mode2
0
1
Normal mode
1
0
○
High power mode
1
1
* Power consumption is increased in the follow order:
Power save mode 1 < Power save mode 2 < Normal mode < High power mode
(Reference current consumption data)
Setup
Current consumption
Power save mode 1
×0.5
Power save mode 2
×0.67
Normal mode
×1.0
High power mode
×1.8
*Above data is reference. It depends on Panel load.
(Note) The setting of Power save mode FR, LCD waveform, Power save mode will influence the following display image qualities.
Please select most suitable value from current consumption and display image quality with LCD panel.
Mode
Power save mode FR
LCD waveform
Power save mode SR
Flicker
○
○
-
Image quality, contrast
-
○
○
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥15ï½¥001
13/28
TSZ02201-0A2A0D300100-1-2
13.Jun.2014 Rev.003