BD9E302EFJ Datasheet, PDF (1/44 Pages) Rohm – Integrated MOSFET Single Synchronous Buck DC/DC Converter

Datasheet
7.0V〜28V Input, 3A Integrated MOSFET
Single Synchronous Buck DC/DC Converter
BD9E302EFJ
 General Description
BD9E302EFJ is a synchronous buck switching regulator
with built-in power MOSFETs. High efficiency at light load
with a SLLM^TM (Simple Light Load Mode). It is most
suitable for use in the equipment to reduce the standby
power is required. It is a current mode control DC/DC
converter and features high-speed transient response.
Phase compensation can also be set easily.
 Key Specifications
 Input voltage range:
7.0V to 28V
 Output voltage range:
1.0V to VIN x 0.7V
 Output current:
3.0 A (Max)
 Switching frequency:
550 kHz (Typ)
 High-Side MOSFET on-resistance: 90 mΩ (Typ)
 Low-Side MOSFET on-resistance: 70 mΩ (Typ)
 Shutdown current:
0 μA (Typ)
 Features
 Synchronous single DC/DC converter
 SLLM^TM control (Simple Light Load Mode)
 Over current protection
 Short circuit protection
 Thermal shutdown protection
 Under voltage lockout protection
 Soft start
 Reduce external diode
 HTSOP-J8 package
 Package
HTSOP-J8
W (Typ) x D (Typ) x H (Max)
4.90 mm x 6.00 mm x 1.00 mm
 Applications
 Consumer applications such as home appliance
 Secondary power supply and Adapter equipment
 Telecommunication devices
HTSOP-J8
 Typical Application Circuit
Figure 1. Application circuit
○Product structure：Silicon monolithic integrated circuit.
www.rohm.com
© 2016 ROHM Co., Ltd. All rights reserved.
TSZ22111・14・001
○This product is not designed for protection against radioactive rays.
1/41
TSZ02201-0J3J0AJ00890-1-2
27.Apr.2016 Rev.002