R1510S Datasheet, PDF (8/41 Pages) RICOH electronics devices division – Input Voltage Range (Maximum Rating) Max. 36.0V (50V)

R1510S
NO.EA-185-140724
VIN=SENSE=14.0V, COUT=6.8μF, Rpull-up=100kΩ, Vpull-up=5.0V, unless otherwise noted.
The specifications surrounded by
are guaranteed by design engineering at -40°C ≤ Ta ≤ 105°C.
VD
Symbol
Item
Conditions
Min. Typ.
(Ta=25°C)
Max. Unit
-VDET
Detector Threshold
VIN Detector Ta=25°C
×0.983
Setting Voltage:
2.3 V to 12.0V ^{-40°C ≤ Ta ≤ 105°C ×0.97}
×1.017
V
×1.03
VHYS
Detector Threshold
Hysteresis
-VDET -VDET
-VDET
×0.025 ×0.05 ×0.075
V
RSENSE
VDDL
IOUT2
ILEAK
SENSE Resistance
Minimum Operating
Voltage
Output Current
(Nch Driver)
Nch Driver Leakage
Current
-VDET < 6.0V
-VDET ≥ 6.0V
VIN ≥ 3.0V, DOUT=0.1V
VIN ≥ 4.0V, DOUT=0.1V
DOUT=7V
1.5
64
MΩ
3.6
57
3.0
V
1.16
mA
1.39
0.33
μA
VRESET
Δ-VDET/
ΔTa
tPLH
VSENSE
Pull-up Voltage
Detector Threshold
Temperature
Coefficient
-40°C ≤ Ta ≤ 105°C
Release Output Delay
Time *¹
SENSE Pin Input
Voltage
5.5
V
±100
ppm
/°C
20
μs
36
V
All test items listed under Electrical Characteristics are done under the pulse load condition (Tj≈Ta=25°C) except
Output Voltage Temperature Coefficient and Detector Threshold Temperature Coefficient.
∗1) Release output delay time is defined as the time to be taken for SENSE to change from 2V to (-VDET) +1V,
and for DOUT output to become “H”.
RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS)
All of electronic equipment should be designed that the mounted semiconductor devices operate within the
recommended operating conditions. The semiconductor devices cannot operate normally over the recommended
operating conditions, even if when they are used over such conditions by momentary electronic noise or surge. And the
semiconductor devices may receive serious damage when they continue to operate over the recommended operating
conditions.
8