|
R1510S Datasheet, PDF (3/41 Pages) RICOH electronics devices division – Input Voltage Range (Maximum Rating) Max. 36.0V (50V) | |||
|
◁ |
R1510S
NO.EA-185-140724
SELECTION GUIDE
The users can select VR output voltage, VD detector threshold, and version that best fit their requirements.
Product Name
R1510Sxxxâ-E2-FE
Package
HSOP-8E
Quantity per Reel
1,000 pcs
Pb Free
Yes
Halogen Free
Yes
xxx: Select the ideal combination of the output voltage (VOUT) and the detector threshold (-VDET)
from the code number starting from 001.
Refer to MARK SPECIFICATION TABLE for detailed information.
â: Select the ideal version from A to D.
(A) Built-in Chip Enable, VIN Detector
(B) SENSE Detector Threshold
(C) Built-in Release Delay Circuit, VIN Detector
(D) Built-in Release Delay Circuit, VOUT Detector
PIN DESCRIPTIONS
⢠HSOP-8E
Top View
8765
Bottom View
567 8
â
1 234
432 1
Pin No.
Symbol
Description
1
VOUT
VR Output Pin
2
NC
No Connection
3
TP*3
Test Pin
4
DOUT
VD Output Pin (Nch Open Drain)
CE
A Version: Chip Enable Pin (âHâ Active)
5
SENSE*1 B Version: VD Sense Pin
CD*2
C, D Versions: Release Output Delay (Power-on Reset) Time Setting Pin
6
TP*3
Test Pin
7
GND
Ground Pin
8
VDD
Input Pin
â) The tab on the reverse side of the IC is in GND level and it should be connected to GND pin (recommended)
or should be left open.
â1) B version monitors SENSE pin voltage.
â2) The release output delay time of voltage detector can be set by connecting a capacitor to CD pin.
â3) TP pin should be connected to GND.
3
|
▷ |