R1111N_17 Datasheet, PDF (4/18 Pages) RICOH electronics devices division – LOW NOISE 150mA LDO REGULATOR

R1111N
ELECTRICAL CHARACTERISTICS
R1111Nxx1A
Symbol
Item
Conditions
(Topt=25°C)
Min. Typ. Max. Unit
V_OUT Output Voltage
V_IN=V_SET+1V, 1mA≤I_OUT≤30mA
×0.98
×1.02 V
I_OUT Output Current
Refer to ELECTRICAL CHARACTERISTICS BY OUTPUT VOLTAGE.
ΔV_OUT
/ΔI_OUT
V_DIF
Load Regulation
Dropout Voltage
V_IN=V_SET+1V, 1mA≤I_OUT≤80mA
12 40 mV
Refer to ELECTRICAL CHARACTERISTICS BY OUTPUT VOLTAGE.
I_SS Supply Current
V_IN=V_SET+1V, I_OUT=0A
35 70 μA
Istandby Standby Current
ΔV_OUT
/ΔV_IN
RR
Line Regulation
Ripple Rejection
V_IN=V_CE, V_IN=V_SET+1V
V_SET+0.5V≤V_IN≤8.0V, I_OUT=30mA
f=1kHz, Ripple 0.5Vp-p, V_IN=V_SET+1V
0.1 1.0 μA
0.05 0.20 %/V
70
dB
V_IN
ΔV_OUT
/ΔTopt
Input Voltage
Output Voltage
Temperature Coefficient
I_OUT=10mA, −40°C≤Topt≤85°C
2.0
8.0
±100
V
Ppm
/°C
I_SC Short Current Limit
V_OUT=0V
50
mA
R_PU CE Pull-up Resistance
2.5 5.0 10.0 MΩ
V_CEH CE Input Voltage “H”
1.5
V_IN
V
V_CEL CE Input Voltage “L”
0
0.25 V
en Output Noise
BW=10Hz to 100kHz
30
μVrms
RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS)
All of electronic equipment should be designed that the mounted semiconductor devices operate within the
recommended operating conditions. The semiconductor devices cannot operate normally over the recommended
operating conditions, even if when they are used over such conditions by momentary electronic noise or surge. And the
semiconductor devices may receive serious damage when they continue to operate over the recommended operating
conditions.
4