R1111N_17 Datasheet, PDF (17/18 Pages) RICOH electronics devices division – LOW NOISE 150mA LDO REGULATOR

R1111N
·Make VDD and GND lines sufficient. If their impedance is high, noise pick up or incorrect operation may result.
·Connect the capacitor with a capacitance of 1μF or more between VDD and GND as close as possible.
·Set external components, especially the output capacitor, as close as possible to the ICs and make wiring as
short as possible.
TYPICAL APPLICATION
CE
CE
IN
VDD R1111Nxx1A VOUT
OUT
IN
VDD R1111Nxx1B VOUT
OUT
Cap.
GND
Cap.
Cap.
GND
Cap.
17