English
Language : 

DS5028E Datasheet, PDF (8/41 Pages) Richtek Technology Corporation – Integrated PMIC with 4-Channel Synchronous Buck Converters, 8 LDOs, and MTP Non-Volatile Memory for Industrial Applications
RT5028E
Parameter
Symbol
Test Conditions
Min Typ Max Unit
LDO1 to LDO8
Input Voltage for
VINL123/456/78
VINL
2.5 -- 5.5 V
Output Voltage LDO123/78 VOUTL 3.1V  VIN  5.5V, 50A  IOUT  IMAX
3%
1.6 to
3.6
3%
V
Output Voltage LDO456
VOUTL 3.1V  VIN  5.5V, 50A  IOUT  IMAX
3%
3 to
3.6
3%
V
Output Current
IOUT
300 -- -- mA
Output Short Current
Isht
330 450 600 mA
Voltage Difference
VIN 
VOUT
VIN > 3.1V
0.05 0.1 0.3
VIN = VSET, IOUT = IOUTMAX
VIN > 2.5V
0.05 0.11 0.5
V
Output Voltage Temperature
Coefficient
-- ±100 -- ppm/C
Supply Current
ISS
IOUT = 0mA
10 35 60 A
Shutdown Current
IOFF
0
1
2
A
Line Regulation
Input 3V to 5V, load = 100mA
0
1
5
mV
Load Regulation
Transient Response
VIN = 5V, Load 100mA to 300mA
VOUT 50A  IOUTMAX / 2 (⊿t = 1s)
0 0.1 1
%
-- 50 -- mV
Ripple Rejection
f = 10kHz, IOUT = IOUTMAX / 2
-- 60 --
dB
Rising Time
VOUT  0.7 x VTarget, IOUT = 0mA
150 220 300 s
Falling Time
VOUT  0.3 x VTarget, IOUT = 0mA
I2C Interface and Control Input Pin Electrical Characteristics
300 600 1000 s
Voltage Output Low
VOL
-- -- 0.4 V
Input Voltage
High-Level VIH
Low-Level VIL
1.5 -- --
V
-- -- 0.4
SCL Clock
SCL
-- -- 400 kHz
Note 1. Stresses beyond those listed “Absolute Maximum Ratings” may cause permanent damage to the device. These are
stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in
the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions may
affect device reliability.
Note 2. θJA is measured under natural convection (still air) at TA = 25°C with the component mounted on a high effective-
thermal-conductivity four-layer test board on a JEDEC 51-7 thermal measurement standard. θJC is measured at the
exposed pad of the package.
Note 3. Devices are ESD sensitive. Handling precaution is recommended.
Note 4. The device is not guaranteed to function outside its operating conditions.
Copyright ©2016 Richtek Technology Corporation. All rights reserved.
www.richtek.com
8
is a registered trademark of Richtek Technology Corporation.
DS5028E-00 October 2016