X8200 Datasheet, PDF (9/19 Pages) rfsolutions.ltd – Synthesised Radio Modem

Synthesised Radio Modem
X8200
X8200HP
Advanced Menu: Display Advanced Menu .
Modem ID
User defined ID number.
Baud
Baud Rate 1.2K to 115.2K
Parity
Enable Parity.
Odd/Even
Select Parity.
RF Power
Set level of RF Power.
Key Transmitter Switch on Transmitter
RF Channel
Set RF Frequency.
RSSI
Bar Graph of Rx Signal
Sensitivity
Set the Receiver Sensitivity
Comms Speed Slow/Fast
Address Mode Enables Modem Address.
AT Enable AT Instr AT instruction are enabled.
Restore Defaults
Exit without Save
Save & Exit
Set Factory Defaults.
Return without saving
operation without saving
settings.
Return to Modem and save
Settings.
Return to Main Menu Display Main Menu.
TX Priority
Message Tag
FEC
Data transmitted priority
Adds Ident. No. to Data
Forward Error Correction
Packetise Data
Number of Retries
Packet Size
Logger Mode
Enable Remote Access
Access Remote Modem
Engage Repeater Path
Set Repeater Path
Data is formed into packets
with error detections and
Acknowledgments. Connect
CTS to RTS on Host.
Sets number of retries.
Sets packet size. 64-1024
Data is stored until polled.
Allows distant Modem to
change settings.
Displays settings of remote
Modem with ID on AT Path.
Enable repeater path.
Sets AT Path M01 to M16.
Advanced Menu
The horizontal arrows are used to select the Advanced Menu.
Modem ID Number
Each modem in a network can be given an individual ID number between 0 and 99
This is used for:
Remote Access Menu
Modem Addressing
Repeater Function
Packet Data Function
Baud Rate Settings
A baud rate is entered by moving the cursor under the current setting with the vertical arrow
keys. Then by pressing the horizontal keys the value will change:
BAUD RATE
115.2K
57.6K
38.4K
19.2K
9.6K
4.8K
2.4K
1.2K
Parity On/Off
DS8200-2 April ’07
©2007 RF Solutions Ltd, www.rfsolutions.co.uk
Page 9