X8200 Datasheet, PDF (8/19 Pages) rfsolutions.ltd – Synthesised Radio Modem

Synthesised Radio Modem
X8200
X8200HP
XON/XOFF to OFF
RTS/CTS to OFF (no handshaking)
5.2 Configuration Menu
The vertical and horizontal arrow keys are used to move around the menu. Alternatively
the numbers keys 2, 4, 6 and 8 can also be used as follows:
Down arrow key or 2 key will move the cursor down the menu
Left arrow key or 4 key will reduce the value
Right arrow key or 6 key will increase the value
Up arrow key or 8 key will move the cursor up the menu
The Enter Key is used in the following function:
Restore Defaults
Exit without Save
Save & Exit
Access Remote Modem
Set Repeater Path
The Space Bar Key is used to delete modem ID numbers in the Repeater Path
To save any changes made in the menu :
Move the cursor to Save & Exit,
Use the horizontal arrow key to select Y.
Press the Enter Key
The configuration menu shown below will be displayed when a radio modem with Modem ID set to 01
remotely accessed a radio modem with Modem ID set to 02.
X8200 Radio Modem V#.#
Local
Advanced Menu N
Modem ID
01
Baud
9600
Parity
N
Odd/Even
E
RF Power
5
Key Transmitter N
RF Channel
17
RSSI
N
Sensitivity
00
Comms Speed S
Address Mode N
Enable AT Instr N
Restore Defaults N
Exit without Save N
Save & Exit
N
Remote
N
02
9600
N
E
5
N
17
N
00
S
N
N
N
N
N
Advanced Menu
Local
Return to Main Menu N
Message Tag
0000
TX Priority
N
FEC
N
Packetise Data
N
Number of Retries
05
Packet Size
20
Logger Mode
N
Enable Remote Access Y
Access Remote Modem Y
Engage Repeater Path N
Set Repeater Path
02
Remote
N
0000
N
N
N
05
20
N
Y
N
N
00
Local
M01 M02 M03 M04 M05 M06 ---- M16
02
Remote M01 M02 M03 M04 M05 M06 ----- M16
(use space bar to delete repeater path)
DS8200-2 April ’07
©2007 RF Solutions Ltd, www.rfsolutions.co.uk
Page 8