RFPA5201E Datasheet, PDF (5/7 Pages) RF Micro Devices – WiFi Power Amplifier 5.0V, 2.4GHz to 2.5GHz

RFPA5201E
Package Drawing
VCC ¹
PA_EN 2
GND 3
RF_In 4
GND 5
PA_EN 6
VREG 7
Pin Out
14 VCC3
13 GND
12 GND
11 RF_Out
10 GND
9 VCC3
8 ^PDet
Notes
1. Shaded area represents Pin 1 location.
2. Thermal vias for center slug “B” should be incorporated into the PCB design. The number and size of thermal vias will depend on the application
Example of the number and size of vias can be found on the RFMD evaluation board layout
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
DS140331
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
5 of 7