RFPA5201E Datasheet, PDF (2/7 Pages) RF Micro Devices – WiFi Power Amplifier 5.0V, 2.4GHz to 2.5GHz

RFPA5201E
Absolute Maximum Ratings
Parameter
Supply Voltage (RF Applied)
Supply Voltage (No RF Applied)
DC Supply Current
Input RF Power with 50W Output Load
Maximum VSWR with no damage
Operating Ambient Temperature
Storage Temperature
Moisture Sensitivity Level
Nominal Operating Parameters
Parameter
Specification
Min Typ Max
Compliance
Operating Frequency
Supply Voltage
PA_EN Voltage High
PA_EN Voltage Low
VREG Voltage High
VREG Voltage Low
2412
4.75
5
1.75 2.9
0
2.85 2.9
0
2484
5.25
5
0.2
3
0.2
Typical Conditions
Output Power
11n Dynamic EVM
Second Harmonic
Third Harmonic
Gain
Gain Variation
Power Detect Range
Power Detect Voltage
Input Return Loss
Output Return Loss
Operating Current
Quiescent Current
PAE (Power Added Efficiency)
Power Down Current
IREG
Leakage Current
29
2.5
3
-38
-36
-48
-45
31.5 33.5
+/-1
+/-2.5
0.1
2.2
1.8 1.9
2.0
-15
-12
-10
-8
875 1000
350 425
18.5
16
12
15
0.5
0.7
Rating
-0.5 to +5.5
-0.5 to +6.0
1800
10
10:1
-40 to +85
-40 to +150
MSL3
Unit
V
V
mA
dBm
°C
°C
Caution! ESD sensitive device.
RFMD Green: RoHS status based on EU
Directive 2011/65/EU (at time of this
document revision), halogen free per IEC
61249-2-21, < 1000ppm each of antimony
trioxide in polymeric materials and red
phosphorus as a flame retardant, and
<2% antimony in solder.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Unit
Condition
MHz
V
V
V
V
V
dBm
%
dBm/MHz
dBm/MHz
dB
dB
dB
V
V
dB
dB
mA
mA
%
mA
mA
mA
802.11b/g/n
802.11n HT20 and HT40 MCS7
Can be tied to Vreg when using 2.85v min and sources 12mA typ.
Turns PA OFF
Can be tied to PA_EN. Requires 12mA typ and 2.85V min
VCC = 5.0V, VREG = 2.9V, PA_EN = 2.9V; 11n MCS7 HT20 and
HT40, temperature = 25°C, unless otherwise noted
802.11n HT20 and HT40 MCS7
At rated POUT
Over 40MHz channel
Over temperature of -40°C to +85°C
POUT = 0dBm to 30dBm
At rated POUT
In specified frequency band
At rated POUT
VCC = 5.0, VREG = PA_EN = 2.9V and RF = OFF
At rated POUT (PA only)
PA_EN = 0V, VCC = 5V, VREG = 2.9V
VCC=5V, PA_EN = 2.9V, VREG = 2.9V
VCC=5V, VREG = 0V, PA_EN=0V
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
DS140331
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 7