RFPA5201E Datasheet, PDF (3/7 Pages) RF Micro Devices – WiFi Power Amplifier 5.0V, 2.4GHz to 2.5GHz

RFPA5201E
Parameter
Specification
Min Typ Max
Typical Conditions
(continued)
Turn-on time from setting of
VREGS
Turn-off time from setting of
VREGS
Stability
Output P1dB
1
1
-25
33
35
Spectral Mask Margin to 802.11n
2
limits
General Performance
ESD
Human Body Model 500
Charge Device Model 1000
Thermal Resistance
Theta_jc
13
Theta_j-ref
18
Junction Temperature for Long
175
Term Reliability (Tjmax)
Unit
µsec
µsec
dBm
dBm
dB
V
V
°C/W
°C/W
°C
Condition
VCC = 5.0V, VREG = 2.9V, PA_EN = 2.9V; 11n MCS7 HT20 and
HT40, temperature = 25°C, unless otherwise noted
Output stable to within 90% of final gain
No spurs above -47dBm into 4:1 VSWR
CW signal
POUT = 31dBm; MCS0 HT20
EIA/JESD22-114A all pins
JESD22-C101C all pins
POUT - 29dBm; duty cycle - 90%; VCC = 5V; VREG = 2.90V; junction to
bottom of laminate package; TREF = 85°C
POUT - 29dBm; duty cycle - 90%; VCC = 5V; VREG = 2.90V; junction to
bottom of PCB; TREF = 85°C
POUT - 29dBm; VCC = 5V; VREG = 2.90V; TREF = 85°C
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
DS140331
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 7