RFFC5061 Datasheet, PDF (21/25 Pages) RF Micro Devices – WIDEBAND SYNTHESIZER/VCO WITH INTEGRATED 6GHz MIXER

RFFC5061/62
Typical Performance Characteristics: RF Mixers, RFFC5061 and RFFC5062
V_DD=+3V and T_A=+27°C unless stated. As measured on RFFC5061/5062 wideband evaluation board.
See application schematic on page 13. Note: Mixer 1 plots only apply to RFFC5061.
LO & RF Leakage at Mixer 1 Output
RF Input Power 0dBm, MIX1_IDD = 4
0.0
LO & RF Leakage at Mixer 2 Output
RF Input Power 0dBm, MIX2_IDD = 4
0.0
-10.0
IF Output at 100MHz
LO Leakage (High Side)
-20.0
RF Leakage
-10.0
IF Output at 100MHz
LO Leakage (High Side)
-20.0
RF Leakage
-30.0
-30.0
-40.0
-40.0
-50.0
-50.0
-60.0
400.0
600.0
800.0 1000.0 1200.0 1400.0 1600.0
RF Input Frequency (MHz)
-60.0
400.0
600.0
800.0 1000.0 1200.0 1400.0 1600.0
RF Input Frequency (MHz)
Typical LO Leakage at Mixer Output
+3.0V Supply Voltage
0.0
Path 1, -40 Deg C
-10.0
Path 1, +27 Deg C
Path 1, +85 Deg C
-20.0
Path 2, -40 Deg C
Path 2, +27 Deg C
-30.0
Path 2, +85 Deg C
-40.0
-50.0
-60.0
-70.0
200 400 600 800 1000 1200 1400 1600 1800 2000
LO Frequency (MHz)
Mixer to Mixer Isolation in Full Duplex Mode
LO = RF input + 100MHz
100.0
90.0
80.0
70.0
60.0
50.0
40.0
0
MIX_IDD = 4
500
1000
1500
2000
2500
RF Input Frequency (MHz)
DS110614
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
21 of 25