RFFC5061 Datasheet, PDF (10/25 Pages) RF Micro Devices – WIDEBAND SYNTHESIZER/VCO WITH INTEGRATED 6GHz MIXER

RFFC5061/62
The modulation frequency is calculated according to the following formula:
F_MOD = 2^MODSTEP  F_PD  MODULATION  2¹⁶
Where MODULATION is a 2's complement number and F_PD is the phase detector frequency.
Programming Information
The RFFC5061 and RFFC5062 share a common serial interface and control block. Please refer to the Register Maps and Pro-
gramming Guide which are available for download from http://rfmd.com/products/IntSynthMixer/.
Evaluation Boards
Evaluation boards for RFFC5061 and RFFC5062 are provided as part of a design kit, along with the necessary cables and pro-
gramming software tool to enable full evaluation of the device. Design kits can be ordered from www.rfmd.com or from local
RFMD sales offices and authorized sales channels. For ordering codes please see “Ordering Information” on page 25.
For further details on how to set up the design kits go to http://rfmd.com/products/IntSynthMixer/.
The standard evaluation boards are configured with 3.7GHz ceramic baluns on the RF ports and wideband transformers on
the IF ports. On the RFFC5061 evaluation board, mixer 1 is configured for down-conversion and mixer 2 is configured for up-
conversion. On the RFFC5062 evaluation board, mixer 2 is configured for down conversion.
10 of 25
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS110614