English
Language : 

SBB-2000 Datasheet, PDF (2/6 Pages) RF Micro Devices – 50MHZ TO 1000MHZ, CASCADABLE ACTIVE BIAS InGaP HBT MMIC AMPLIFIER
SBB-2000
Preliminary
Absolute Maximum Ratings
Parameter
Rating
Unit
Total Current (ID)
110
mA
Device Voltage (VD)
5.5
V
Power Dissipation
0.61
W
Operating Lead Temperature (TL)
-40 to +85
°C
RF Input Power
+12 (TBR)*
dBm
Storage Temperature Range
-55 to +150
°C
Operating Junction Temp (TJ)
+150
°C
ESD Rating - Human Body Model
(HBM)
Class 1C
*TBR=To Be Reviewed
Operation of this device beyond any one of these limits may cause permanent
damage. For reliable continuous operation, the device voltage and current
must not exceed the maximum operating values specified in the table on
page one.
Bias Conditions should also satisfy the following expression:
IDVD<(TJ-TL)/RTH, j-l
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
Typical Performance (GSG Probe Data with Bias Tees) VD=5V, ID=90mA, T=25°C, Z=50Ω
Parameter
Units 50MHz 100MHz 250MHz 500MHz
Small Signal Gain
dB
20.4
20.3
20.0
20.0
Output 3rd Order Intercept Point (see dBm
note 1)
42.5
39.5
Output Power at 1dB Compression dBm
22.5
21.5
Input Return Loss
dB
17.3
27.4
38.4
30.0
Output Return Loss
dB
16.2
19.8
19.7
14.5
Reverse Isolation
dB
22.2
21.6
21.9
22.2
Noise Figure
dB
3.0
2.9
3.0
Note 1: 0dBm/tone, 1MHz spacing.
750 MHz
19.9
37.4
20.7
24.8
11.7
21.9
3.1
1000 MHz
19.5
34.5
20.0
22.5
9.4
21.8
3.1
2 of 6
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
EDS-106099 Rev A