PD168002_15 Datasheet, PDF (9/17 Pages) Renesas Technology Corp – MONOLITHIC 6-CHANNEL H-BRIDGE DRIVER

µ PD168002
5. STANDBY FUNCTION
The µ PD168002 realizes a standby function by combination of an input signal.
The specified output is set to high impedance (Hi-Z) status by setting STB to low level.
Each pin can be independently controlled, and can be set to standby status of the self current consumption of the IC
reduced as much as possible by setting all pins to low level. In the standby status, the overheat protection circuit and
the undervoltage lockout circuit do not operate.
Pin
Function
Output Status when Pin = L
ch1
ch2
ch3
ch4
ch5
ch6
STB12
Sled block standby
Hi-Z
Hi-Z
ON
ON
ON
ON
STB34
Focus and tracking
ON
ON
Hi-Z
Hi-Z
ON
ON
block standby
STB5
Spindle block standby
ON
ON
ON
ON
Hi-Z
ON
STB6
Loading block standby
ON
ON
ON
ON
ON
Hi-Z
Remark ON: Status which can turn on output, Hi-Z: High impedance
6. OPERATION WAVEFORM EXAMPLES
(1) Example of the clockwise revolution of the right figure when 2-phase diving
<1> <2> <3> <4> <1> <2> <3> <4> <1>
Phase A IN
(IN1)
Phase B IN
(IN2)
(2)
OUTA → OUTB
<4>
ch1 <1>
(2) Example of the counter-clockwise revolution of the right figure when 2-phase diving
<1> <4> <3> <2> <1> <4> <3> <2> <1>
Phase A IN
(IN1)
OUTB → OUTA
OUTA → OUTB
ch2
<3>
<2>
OUTB → OUTA
(1)
Phase B IN
(IN2)
Remark SEL12 = L, EN12 = H
Data Sheet S16040EJ1V0DS
7