PD168002_15 Datasheet, PDF (15/17 Pages) Renesas Technology Corp – MONOLITHIC 6-CHANNEL H-BRIDGE DRIVER

µ PD168002
9. RECOMMENDED SOLDERING CONDITIONS
The µ PD168002 should be soldered and mounted under the following recommended conditions.
For soldering methods and conditions other than those recommended below, contact an NEC Electronics sales
representative.
For technical information, see the following website.
Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html)
Type of Surface Mount Device
µ PD168002GA-9EU: 48-pin plastic TQFP (fine pitch) (7 x 7)
Process
Conditions
Infrared reflow
Package peak temperature: 235°C, Time: 60 seconds MAX. (at 210°C or higher) ,
Count: Three times or less, Exposure limit: None,
Flux: Rosin flux with low chlorine (0.2 Wt% or below) recommended.
Symbol
IR35-00-3
Caution Do not use different soldering methods together (except for partial heating) .
Data Sheet S16040EJ1V0DS
13