PD65881GB-P02_15 Datasheet, PDF (7/12 Pages) Renesas Technology Corp – μPD71051-Compliant Serial Control Unit Gate Array

μ PD65881GB-P02
2. ELECTRICAL SPECIFICATIONS
This section describes only the differences with the μ PD71051.
For electrical specifications other than those below, refer to the μPD71051 Data Sheet (document number: IC-6494).
Absolute Maximum Ratings
Parameter
Symbol
Conditions
Ratings
Unit
Power supply voltage
VDD
−0.5 to +6.0
V
Input voltage
VI
−0.5 to +6.0
V
Output voltage
VO
−0.5 to +6.0
V
Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any
parameter. In other words, the absolute maximum ratings are values at which the product may
begin to suffer degradation. Therefore the product must be used under conditions that ensure that
the absolute maximum ratings are not exceeded.
Recommended Operating Range
This is the same as the μ PD71051. This product does not guarantee operation at less than 4.5 V.
DC Characteristics (VDD = 5 V±10%, TA = −40 to +85°C)
Parameter
Symbol
This Product
Condition Min.
Typ.
Max.
Input voltage, high
VIH
2.29
VDD
Input voltage, low
VIL
0.00
0.77
Output voltage, high VOH
IOH =
0 mA
VDD−0.1
IOH =
VDD−0.4
3 mA
Output voltage, low
VOL
IOL =
0.4
3 mA
Output current, low
IOL
3.0
μ PD71051
Condition Min.
Typ.
2.2
−0.5
IOH =
−400 μ A
0.7×VDD
IOL =
2.5 mA
2.5
Unit
Max.
VDD+0.3
V
0.8
V
V
0.4
V
mA
AC Characteristics
These are similar to the μ PD71051 characteristics, except for the following restrictions on load capacitance.
Operation outside the range of these restrictions is not guaranteed.
D7 to D0: 100 pF or less
TXDATA, SYNC/BRK, RXRDY, TXEMP, TXRDY: 40 pF or less
Data Sheet A18499EJ2V0DS
5