PD65881GB-P02_15 Datasheet, PDF (4/12 Pages) Renesas Technology Corp – μPD71051-Compliant Serial Control Unit Gate Array

μ PD65881GB-P02
Disclaimer
• This product is not functionally equivalent to any similar non-NEC Electronics product. NEC Electronics shall assume no
responsibility for any loss or damage incurred by customers or third parties resulting from the replacement of products similar
to, but other than, the μ PD71051GB-10-3B4.
• NEC Electronics shall assume no responsibility for any loss or damage incurred by customers or third parties resulting from the
use of this product outside the conditions described in the absolute maximum ratings, recommended operation range, and
quality grades.
COMPARISON OF μPD65881GB-P02 AND μPD71051
Feature
Part number (mark)
Package type
Package shape
(comparison of 44-pin QFP)
Function of pin 39
Lead-free support
This Product
μ PD71051
μ PD65881GB-P02-3BS-A
(658N51)
μ PD71051GB-10-3B4
(standard NEC Electronics mark)
Only 44-pin QFP
QFP, DIP, SOP, PLCC (QFJ)
The body size and package width are the same, but the pin lengths
and pin bending method are different.
IC (connection with external pin NC
prohibited)
Yes
No
Recommended soldering
conditions
Absolute maximum ratings
Power supply voltage
Input voltage
Output voltage
Recommended operating
range
DC characteristics
AC characteristics
IR60-207-3, partial heating
IR35-00-3, VP15-00-3,
WS60-00-1, partial heating
−0.5 to +6.0 (V)
−0.5 to +7.0 (V)
−0.5 to +6.0 (V)
−0.5 to VDD+0.3 (V)
−0.5 to +6.0 (V)
−0.5 to VDD+0.3 (V)
TA = −40 to +85°C, VDD = 5 V±10%
This product does not guarantee operation at less than 4.5 V.
Partially different
This product has the following restrictions on load capacitance.
D7 to D0: 100 pF or less
TXDATA, SYNC/BRK, RXRDY, TXEMP, TXRDY: 40 pF or less
Reference
−
−
4. PACKAGE
DRAWING
1. PIN LAYOUT
ORDERING
INFORMATION
5. RECOMMENDED
SOLDERING CONDITIONS
2. ELECTRICAL
SPECIFICATIONS
ORDERING INFORMATION
Part Number
μ PD65881GB-P02-3BS-A
Package
44-pin plastic QFP (10 x 10 mm)
Remark Products with -A at the end of the part number are lead-free products.
QUALITY GRADES
"Standard"
This product is intended to be used for applications such as computers, office equipment, communications
equipment, test and measurement equipment, and home electronic appliances. It therefore cannot be used for the
following applications.
Applications requiring special or specific grades, such as transportation equipment (automobiles, trains, ships,
etc.), traffic control systems, medical equipment, aircraft equipment, and aerospace equipment.
Remark For details of quality grades, refer to Quality Grades on NEC Semiconductor Devices (document
number: C11531E).
2
Data Sheet A18499EJ2V0DS