RH850F1L Datasheet, PDF (6/16 Pages) Renesas Technology Corp – Emulator

RH850/F1L Series E1/E20 Emulator Release Note(Restrictions when using CubeSuite+)
No. 6 Regarding memory map function
[Description]
The OCD does not support external memory.
[Resolution]
None
No. 7 Regarding memory function(CPU reset)
[Description]
When [CPU Reset after download] and [Execute to the specified symbol after CPU Reset] are set to [YES],
execution proceeds to the location of the specified symbol after downloading.
If the [Download] menu item has been used to connect the debug tool and download a program, however,
memory data from the reset to the specified symbol are not displayed in pink (Real-time RAM monitor) in the
[Memory] panel.
[Resolution]
Execute [Connect to Debug Tool] and [Download] separately.
After the program has stopped, memory data being executed are displayed in pink.
No. 8 Regarding memory function(Peripheral Break)
[Description]
Peripheral Break is a function to stop operation of peripheral modules when a debugger stops operation of the
microcontroller. However when rewriting a flash memory, a peripheral module set as peripheral break operates.
Therefore the different counter value of WDT would be occurred between when a flash memory is rewritten and
when it is not during the microcontroller stops.
[Resolution]
When rewriting a flash memory during the microcontroller stops, do CPU reset before executing a user program,
or execute a user program by reset GO.
No. 9 Regarding memory function(DMM)
[Description]
Memory access by DMM function cannot be set to other than Local RAM area and Global RAM area.
[Resolution]
None
No. 10 Regarding IO register display function
[Description]
Bit names are not displayed.
[Resolution]
None
R20UT2743EJ0200 Rev.2.00
Mar 20, 2014
Page 6 of 13