|
HD64F2328VTE25 Datasheet, PDF (331/1146 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents | |||
|
◁ |
Section 8 I/O Ports
Bit 1âAddress 21 Enable (A21E): Enables or disables address output 21 (A21). For details, see
section 8.2, Port 1.
Bit 0âAddress 20 Enable (A20E): Enables or disables address output 20 (A20). For details, see
section 8.2, Port 1.
Port Function Control Register 2 (PFCR2)
Bit
:
7
6
5
4
3
2
1
0
â
â CS167E CS25E ASOD
â
â
â
Initial value :
0
0
1
1
0
0
0
0
R/W
: R/W
R/W
R/W
R/W
R/W
R
R
R
PFCR2 is an 8-bit readable/writable register that performs I/O port control. PFCR2 is initialized to
H'30 by a reset, and in hardware standby mode. This bit is valid in modes 4 to 6.
Bits 7 and 6âReserved: Only 0 should be written to these bits.
Bit 5âCS167 Enable (CS167E): Enables or disables CS1, CS6, and CS7 output. Change the
CS167E setting only when the DDR bits are cleared to 0.
Bit 5
CS167E
0
1
Description
CS1, CS6, and CS7 output disabled (can be used as I/O ports)
CS1, CS6, and CS7 output enabled
(Initial value)
Bit 4âCS25 Enable (CS25E): Enables or disables CS2, CS3, CS4, and CS5 output. Change the
CS25E setting only when the DDR bits are cleared to 0. This bit is valid in modes 4 to 6.
Bit 4
CS25E
0
1
Description
CS2, CS3, CS4, and CS5 output disabled (can be used as I/O ports)
CS2, CS3, CS4, and CS5 output enabled
(Initial value)
Bit 3âAS Output Disable (ASOD): Enables or disables AS output. This bit is valid in modes 4
to 6. For details, see section 8.11, Port F.
Bits 2 to 0âReserved: When read, these bits are always read as 0.
Rev.7.00 Feb. 14, 2007 page 297 of 1108
REJ09B0089-0700
|
▷ |