M16C Datasheet, PDF (33/39 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

M16C/26 Group
5. Electrical Characteristics (VCC=3V)
VCC = 3V
Timing Requirements
(VCC = 3V, VSS = 0V, at Topr = – 20 to 85^oC / – 40 to 85^oC unless otherwise specified)
Table 16.27. Timer A Input (Counter Input in Event Counter Mode)
Symbol
tc(TA)
tw(TAH)
tw(TAL)
TAiIN input cycle time
TAiIN input HIGH pulse width
TAiIN input LOW pulse width
Parameter
Standard
Min.
Max.
Unit
150
ns
60
ns
60
ns
Table 16.28. Timer A Input (Gating Input in Timer Mode)
Symbol
tc(TA)
tw(TAH)
tw(TAL)
TAiIN input cycle time
TAiIN input HIGH pulse width
TAiIN input LOW pulse width
Parameter
Standard
Min.
Max.
Unit
600
ns
300
ns
300
ns
Table 16.29. Timer A Input (External Trigger Input in One-shot Timer Mode)
Symbol
tc(TA)
tw(TAH)
tw(TAL)
Parameter
TAiIN input cycle time
TAiIN input HIGH pulse width
TAiIN input LOW pulse width
Standard
Unit
Min.
Max.
300
ns
150
ns
150
ns
Table 16.30. Timer A Input (External Trigger Input in Pulse Width Modulation Mode)
Symbol
Parameter
Standard
Min. Max.
Unit
tw(TAH)
TAiIN input HIGH pulse width
150
ns
tw(TAL)
TAiIN input LOW pulse width
150
ns
Table 16.31. Timer A Input (Counter Increment/decrement Input in Event Counter Mode)
Symbol
tc(UP)
tw(UPH)
tw(UPL)
tsu(UP-TIN)
th(TIN-UP)
Parameter
TAiOUT input cycle time
TAiOUT input HIGH pulse width
TAiOUT input LOW pulse width
TAiOUT input setup time
TAiOUT input hold time
Standard
Min. Max.
Unit
3000
ns
1500
ns
1500
ns
600
ns
600
ns
Table 1.6.32. Timer A Input (Two-phase Pulse Input in Event Counter Mode)
Symbol
Parameter
Standard
Min. Max.
Unit
tc(TA)
TAiIN input cycle time
2
µs
tsu(TAIN-TAOUT) TAiOUT input setup time
500
ns
tsu(TAOUT-TAIN) _{TAiIN input setup time}
500
ns
Rev.1.00 2004.6.10 page 33 of 37
REJ09B0176-0100Z