UPD78P083GB-3BS-MTX-A Datasheet, PDF (32/58 Pages) Renesas Technology Corp – 8-BIT SINGLE-CHIP MICROCONTROLLER

µPD78P083
DC Characteristics (TA = –40 to +85°C, VDD = 1.8 to 5.5 V)
Parameter
Supply current ^{Note 1}
Symbol
Test Conditions
MIN. TYP. MAX. Unit
IDD1
5.0-MHz crystal
VDD = 5.0 V ± 10% ^{Note 4}
5.4
16.2
mA
oscillation operating
VDD = 3.0 V ± 10% ^{Note 5}
0.8
2.4
mA
mode (fXX = 2.5 MHz) ^{Note 2} VDD = 2.0 V ± 10% ^{Note 5}
0.45
1.35
mA
5.0-MHz crystal oscil- VDD = 5.0 V ± 10% ^{Note 4}
9.5
28.5
mA
lation operating mode VDD = 3.0 V ± 10% ^{Note 5}
1.0
3.0
mA
(fXX = 5.0 MHz) ^{Note 3}
IDD2
5.0-MHz crystal oscil- VDD = 5.0 V ± 10%
1.4
4.2
mA
lation HALT mode
VDD = 3.0 V ± 10%
0.5
1.5
mA
(fXX = 2.5 MHz) ^{Note 2} VDD = 2.0 V ± 10%
280
840
µA
5.0-MHz crystal oscil- VDD = 5.0 V ± 10%
1.6
4.8
mA
lation HALT mode
VDD = 3.0 V ± 10%
0.65
1.95
mA
(fXX = 5.0 MHz) ^{Note 3}
IDD3
STOP mode
VDD = 5.0 V ± 10%
0.1
30
µA
VDD = 3.0 V ± 10%
0.05
10
µA
VDD = 2.0 V ± 10%
0.05
10
µA
Notes 1. Not including AVREF, AVDD currents or port currents (including current flowing into internal pull-up resistors).
2. fXX = fX/2 operation (when oscillation mode selection register (OSMS) is set to 00H).
3. fXX = fX operation (when oscillation mode selection register (OSMS) is set to 01H).
4. High-speed mode operation (when processor clock control register (PCC) is set to 00H).
5. Low-speed mode operation (when processor clock control register (PCC) is set to 04H).
Remark fxx: Main system clock frequency (fx or fx/2)
fx: Main system clock oscillation frequency
30