QB-78K0FX2-T44GB Datasheet, PDF (30/44 Pages) Renesas Technology Corp – IECUBE is a registered trademark of NEC Electronics Corporation in Japan and Germany PC/AT is a trademark of International Business Machines Corporation.

CHAPTER 2 SETUP PROCEDURE
<5> Since the length of the GND wire below the head (insulated part) is approximately 60 mm, there must be
a GND to which it can be connected to within the range of an approximately 60 mm radius section of the
target system for connecting the emulation probe, as shown in Figure 2-7.
Figure 2-7. Where GND Wire Can Be Connected
L = 60
27.5
30.75
Target system
28
User’s Manual U17669EJ3V0UM