 English |
|
|
|
|
|
|
|
| YRDKRX62N Datasheet, PDF (23/43 Pages) Renesas Technology Corp – Renesas Demonstration Kit (RDK) for RX62N User’s Manual: Hardware | |||
| |||
| ◁ |
Chapter 8. Programming Methods
The RDK is intended for use with HEW and includes an integrated Segger J-Link Lite debugger. Refer to RX62N Group Hardware Manual for
details of programming the microcontroller without using these tools. The on-board J-Link Lite is pre-programmed at the factory and configured
for normal operation. The debugger can be disabled by fitting a jumper to the J-Link disable 2-pin header. This is useful if the board needs
to be put into either USB or UART boot mode. The J-Link Lite is located in the upper left section of the RX62N RDK. Should the Segger
Micro become inoperable â it will need to be returned to Renesas for repair.
19
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese