PD16782_15 Datasheet, PDF (23/28 Pages) Renesas Technology Corp – SOURCE DRIVER FOR 300/288-OUTPUT TFT-LCD (NAVIGATION, AUTOMOBILE LCD-TV)

µPD16782
Electrical Characteristics (TA = −30 to +85 °C, VDD1 = 3.0 to 5.5 V, VDD2 = 5.0 V ± 0.5 V, VSS1 = VSS2 = 0 V)
Parameter
Symbol
Condition
MIN.
TYP. MAX.
Unit
Maximum video signal output voltage VVOH
VDD2 − 0.35
V
Minimum video signal output voltage VVOL
0.35
V
Logic high level output voltage
VLOH
STHL, STHR pins,
0.9 VDD1
V
IOH = −1.0 mA
Logic low level output voltage
VLOL
Video signal high level output current IVOH
STHL, STHR pins
IOL = 1.0 mA
INH = L, VOF = VDD2 − 1.0 V
VO = VDD2 − 0.5 V
0.1 VDD1
V
−0.20 −0.08
mA
Video signal low level output current IVOL
INH = L,
VOF = 1.0 V, VO = 0.5 V
0.08
0.20
mA
Reference voltage 1
VREF1
VDD2 = 5.0 V, TA = 25°C,
VVI = 0.5 V
0.49
V
Reference voltage 2
VREF2
VDD2 = 5.0 V, TA = 25°C,
VVI = 2.0 V
1.99
V
Reference voltage 3
VREF3
VDD2 = 5.0 V, TA = 25°C,
3.49
V
VVI = 3.5 V
Output voltage deviation 1
Output voltage deviation 2
∆VVO1
∆VVO2
VDD2 = 5.0 V, TA = 25°C,
VVI = 0.5 V
VDD2 = 5.0 V, TA = 25°C,
VVI = 2.0 V
±30
mV
±30
mV
Output voltage deviation 3
Logic input leakage current
∆VVO3
ILL
VDD2 = 5.0 V, TA = 25°C,
VVI = 3.5 V
Logic input except Osel
±30
mV
±1.0
µA
Video input leakage current
IVL
Logic dynamic current consumption IDD1
Osel, VI = VDD = 3.3 V
fCLI = 14 MHz
VVI = 2.0 V,
no load,
fINH = 15.4 kHz,
PWINH = 5.0 µs
VDD1 = 3.3 ± 0.3 V
VDD1 = 5.0 ± 0.5 V
90
µA
±10
µA
3
mA
4.5
mA
Driver dynamic current consumption IDD2
fCLI = 14 MHz
VVI = 2.0 V,
12
mA
no load,
fINH = 15.4 kHz,
PWINH = 5.0 µs
Remarks 1. VOF: output applied voltage, VO: output voltage without load
2. The reference values are typical values only. The output deviation is only guaranteed within the chip.
Data Sheet S15806EJ1V0DS
21