PD16715A_15 Datasheet, PDF (13/18 Pages) Renesas Technology Corp – 384-OUTPUT TFT-LCD SOURCE DRIVER(COMPATIBLE WITH 64-GRAY SCALES)

µ PD16715A
+2.5
Electrical Characteristics (TA = –10 to +75 °C, VDD1 = 3.3 V ± 0.3 V, VDD2 = 11.0 V –2.0V, VSS1 = VSS2 = 0 V)
Parameter
Symbol
Condition
MIN. TYP. MAX. Unit
Input Leak Current
IIL
±1.0
µA
High-Level Output Voltage
VOH
STHR (STHL), IOH = 0 mA
VDD1 − 0.1
VDD1
V
Low-Level Output Voltage
•
γ -Corrected Supply Current
VOL
STHR (STHL), IOL = 0 mA
0.1
V
Iγ
VDD2 = 13 V,
V0 pin, V5 pin
0.31
0.8
mA
V0 to V4 = V5 to V9 = 6.0 V V4 pin, V9 pin
–0.8 –0.31
mA
Driver Output Current
IVOH
VX = 8.0 V, VOUT = 6.0 V
–0.25 mA
IVOL
VX = 1.0 V, VOUT = 3.0 V
0.25
mA
Output Voltage Deviation
∆VO
Input data
±20
mV
Average Output Voltage
Variation
∆VAV
Input data
±10
mV
Output Voltage Range
VO
Input data
VDD2 +0.1
VDD2 – 0.1
V
Logic Part Dynamic Current
Consumption
IDD1
VDD1 = 3.6 V, TA = 25°C
1.5
8
mA
Driver Part Dynamic Current
Consumption
IDD2
VDD1 = 3.0 V, VDD2 = 13.5 V, No loads,
TA = 25°C
3.5
8
mA
Cautions 1. The output voltage deviation refers to the voltage difference between adjoining output pins when
the display data is the same (within the chip).
2. The average output voltage variation refers to the average output voltage difference between
chips. The average output voltage refers to the average voltage between chips when the
display data is the same.
3. The STB cycle is defined to be 20 µs at fCLK = 33 MHz.
4. The TYP. values refer to an all black or all white input pattern. The MAX. value refers to the
measured values in the dot checkerboard input pattern.
5. Refers to the current consumption per driver when cascades are connected under the
assumption of XGA single-sided mounting (8 units).
+2.5
Switching Characteristics (TA = –10 to +75 °C, VDD1 = 3.3 V ± 0.3 V, VDD2 = 11.0 V –2.0 V, VSS1 = VSS2 = 0 V)
Parameter
Symbol
Condition
MIN.
TYP.
MAX. Unit
Start Pulse Delay Time
Driver Output Delay Time
tPLH1
tPLH2
tPLH3
tPHL2
tPHL3
CL = 25 pF
CL = 50 pF, RL = 50 kΩ
9.1
14
ns
5.2
11
µs
9.9
17
µs
5.3
11
µs
10.4
17
µs
Input Capacitance
CI1
STHR (STHL) excluded, TA = 25°C
5.8
15
pF
CI2
STHR (STHL),TA = 25°C
5.7
15
pF
Data Sheet S13944EJ2V0DS00
11