6V7 Datasheet, PDF (118/298 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER

M306V7MG/MH/MJ/MJA-XXXFP, M306V7FG/FH/FJ/FJAFP
Table 2.11.6 Specifications of UART Mode (2)
Item
Specification
Select function
• Serial data logic switch (UART2)
This function is reversing logic value of transferring data. Start bit, parity bit
and stop bit are not reversed.
• TxD, RxD I/O polarity switch
This function is reversing TxD port output and RxD port input. All I/O data
level is reversed.
Notes 1: ‘n’ denotes the value 0016 to FF16 that is set to the UARTi bit rate generator.
2: fEXT is input from the CLKi pin.
3: If an overrun error occurs, the UARTi receive buffer will have the next data written in. Note also
that the UARTi receive interrupt request bit is not set to “1”.
Rev.1.00 May 18, 2004 page 118 of 296