PD168103_15 Datasheet, PDF (10/22 Pages) Renesas Technology Corp – 5-CHANNEL OPERATIONAL AMPLIFIER, IRIS DRIVER, AND 4-CHANNEL H-BRIDGE DRIVER

µ PD168103
5. NOTE ON CORRECT USE
5.1 Pin Processing of Unused Circuit
The input/output pins of an unused circuit must be processed as specified below.
A pull-down or pull-up resistor is connected inside to the logic input pins. Connect the input pins to the GND or LVDD
(INIR1 and INIR2) potential when they are not used.
A pull-down resistor is not connected to the RESETB pin. Be sure to fix the RESETB pin to the LVDD or GND
potential when it is used.
5.2 OUT4S pin
Keep the voltage in the OUT4S pin to 2 V or less.
If an application circuit like the one shown below is used, the input voltage range of the amplifier is also 2 V or less.
IN4P
+
IN4M
−
OUT4D
OUT4S
8
Data Sheet S17332EJ1V0DS