R8A66597FP Datasheet, PDF (1/185 Pages) Renesas Technology Corp – ASSP (USB2.0 2 Port Host/1 Port Peripheral Controller)

R8A66597FP/DFP/BG
ASSP (USB2.0 2 Port Host/1 Port Peripheral Controller)
REJ03F0229-0101
Rev1.01
Oct 17, 2008
1 Overview
1.1 Overview
The R8A66597 is a Universal Serial Bus (USB) Controller equipped with USB Host functions and Peripheral functions
applicable for On-The-Go. When selecting the Host Controller function, it has two USB ports available for Hi-Speed,
Full-Speed, and Low-Speed transfer compliant with USB Specification Revision 2.0. When selecting the Peripheral
Controller function, it has one USB port available for Hi-Speed and Full-Speed transfer compliant with USB Specification
Revision 2.0.
This controller has a built-in USB transceiver and is compatible with all the transfer types defined in USB Specification
Revision 2.0.
The internal buffer memory is 8.5K, and a maximum ten pipes can be used for transferring data. For Pipe1 to Pipe9, any
endpoint address can be assigned matching the peripheral functions for communication or user system. Separate bus or
multiplex bus can be selected for the CPU connection. A split bus interface (exclusively for the DMA interface) that is
different from the CPU bus interface is provided and is suitable for systems demanding high-performance data transfer.
1.2 Features
1.2.1 Built-in Host Controller and Peripheral Controller compatible with Hi-Speed USB
• Built-in USB Host Controller and Peripheral Controller
• Toggle between USB Host functions and Peripheral functions is possible according to what is written to the register
• Built-in USB transceiver
1.2.2 Low power consumption
• 1.5V core power consumes less power when operating
• With the installed Low Power Sleep Mode functions, less power is consumed when the USB is not in use, which is
also applicable for portable devices
• Standby power consumption can be greatly reduced by keeping only the VIF power source ON when not using the
USB function.
• Operational with a 3.3V single power supply using the internal 1.5V core power regulator
1.2.3 Space-saving package
• Few external devices and space-saving package
VBUS signal can be connected directly to the controller input pin
Built-in D+ pull-up resistor (for Peripheral function)
Built-in D+ and D- pull-down resistors (for Host function)
Built-in D+ and D- terminating resistors (for Hi-Speed operations)
Built-in D+ and D- output resistors (for Full-Speed and Low-Speed operations)
Rev1.01 Oct 17, 2008
page 1 of 183