HYS64T256020EDL Datasheet, PDF (4/51 Pages) Qimonda AG – 200-Pin SO-DIMM DDR2 SDRAM Modules

Internet Data Sheet
HYS64T[128/256]020EDL-[25F/2.5/3/3S/3.7]-C
SO-DIMM DDR2 SDRAM Module
1.2
Description
The Qimonda HYS64T[128/256]020EDL-[25F/2.5/3/3S/3.7]-C
module family are small outline DIMM modules “SO-DIMMs”
with 30 mm height based on DDR2 technology. DIMMs are
available as non-ECC modules in 128M × 64 (1GB) and
256M × 64 (2 GB) organization and density, intended for
mounting into 200-pin connector sockets.
The memory array is designed with 1-Gbit Double-Data-Rate-
Two (DDR2) Synchronous DRAMs. Decoupling capacitors
are mounted on the PCB board. The DIMMs feature serial
presence detect based on a serial E²PROM device using the
2-pin I²C protocol. The first 128 bytes are programmed with
configuration data and are write protected; the second
128 bytes are available to the customer.
Product Type¹⁾
Compliance Code²⁾
TABLE 2
Ordering Information for RoHS Compliant Products
Description
SDRAM
Technology
PC2–6400
HYS64T128020EDL–25F–C 1 GB 2R×16 PC2–6400S–555–12–A0
2 Rank, Non-ECC
1 Gbit (×16)
HYS64T256020EDL–25F–C 2 GB 2R×8 PC2–6400S–555–12–F0
2 Rank, Non-ECC
1 Gbit (×8)
PC2–6400
HYS64T128020EDL–2.5–C 1 GB 2R×16 PC2–6400S–666–12–A0
2 Rank, Non-ECC
1 Gbit (×16)
HYS64T256020EDL–2.5–C 2 GB 2R×8 PC2–6400S–666–12–F0
2 Rank, Non-ECC
1 Gbit (×8)
PC2–5300
HYS64T128020EDL–3–C
1 GB 2R×16 PC2–5300S–444–12–A0
2 Rank, Non-ECC
1 Gbit (×16)
HYS64T256020EDL–3–C
2 GB 2R×8 PC2–5300S–444–12–F0
2 Rank, Non-ECC
1 Gbit (×8)
PC2–5300
HYS64T128020EDL–3S–C 1 GB 2R×16 PC2–5300S–555–12–A0
2 Rank, Non-ECC
1 Gbit (×16)
HYS64T256020EDL–3S–C 2 GB 2R×8 PC2–5300S–555–12–F0
2 Rank, Non-ECC
1 Gbit (×8)
PC2–4200
HYS64T128020EDL–3.7–C 1 GB 2R×16 PC2–4200S–444–12–A0
2 Rank, Non-ECC
1 Gbit (×16)
HYS64T256020EDL–3.7–C 2 GB 2R×8 PC2–4200S–444–12–F0
2 Rank, Non-ECC
1 Gbit (×8)
1) All Product Type numbers end with a place code, designating the silicon die revision. Example: HYS64T128020EDL–3.7–C, indicating Rev.
“C” dies are used for DDR2 SDRAM components. For all Qimonda DDR2 module and component nomenclature see Chapter 6 of this data
sheet.
2) The Compliance Code is printed on the module label and describes the speed grade, for example “PC2–4200S–444–12–A0”, where 4200S
means Unbuffered SO-DIMM modules with 4.26 GB/sec Module Bandwidth and “444-12” means Column Address Strobe (CAS) latency
= 4, Row Column Delay (RCD) latency = 4 and Row Precharge (RP) latency = 4 using the latest JEDEC SPD Revision 1.2 and produced
on the Raw Card “A”.
Rev. 1.0, 2007-03
4
11212006-D34H-5W6Z