PT6584 Datasheet, PDF (42/42 Pages) Princeton Technology Corp – LCD Driver IC

LCD Driver IC
Tel:[phone]
Fax:[phone]
URL:http://www.princeton.com.tw
PT6584
Symbol
A
A1
A2
b
b1
D
D1
e
E
E1
S
R1
R2
L
L1
C
θ
θ1
θ2
θ3
Min.
-
0.05
1.35
0.17
0.17
0.20
0.08
0.08
0.45
0.09
0^o
0^o
11^o
11^o
Nom.
-
-
1.40
0.22
0.20
14.00 BSC
12.00 BSC
0.50 BSC
14.00 BSC
12.00 BSC
-
-
-
0.60
1.00 REF
-
3.5^o
-
12^o
12^o
Max.
1.60
0.15
1.45
0.27
0.23
-
-
0.20
0.75
0.20
7^o
-
13^o
13^o
Notes:
1. Dimensioning and tolerancing per ASME Y14.5M-1994.
2. The top package body may be smaller than the bottom package size as much as 0.15mm.
3. Datum A-B and D to be determined at the datum plane H.
4. Dimensions D1 and E1 do not include mold protrusions. Allowable protrusion is 0.25mm
per side. d1 and E1 are maximum plastic body size dimensions including mold mismatch.
5. Controlling Dimensions: Millimeters
6. Dimension b does not include dambar protrusion. Allowable dambar protrusion shall not cause
the lead width to exceed the maximum b dimension by more than 0.08mm. Dambar cannot be
located on the lower radius or the foot. Minimum space between protrusion and an adjacent lead
is 0.07 mm for 0.4mm and 0.5mm pitch package.
7. A1 is defined as the distance from the seating plane to the lowest point on the package body.
8. Refer to JEDEC MS-026 Variation BDD.
JEDEC is the trademark of JEDEC SOLID STATE TECHNOLOGY CORPORAITON.
PT6584 V1.1
- 42 -
August, 2006