PT6315-S_10 Datasheet, PDF (20/21 Pages) Princeton Technology Corp – VFD Driver/Controller IC

VFD Driver/Controller IC
Tel:[phone]
Fax:[phone]
URL:http://www.princeton.com.tw
PT6315-S
Symbol
A
A1
B
C
D
E
e
H
h
L
a
Min.
2.35
0.10
0.33
0.23
17.70
7.40
10.00
0.25
0.40
0°
Nom.
1.27 bsc.
Max.
2.65
0.30
0.51
0.32
18.10
7.60
10.65
0.75
1.27
8°
Notes:
1. Dimensioning and tolerancing per ANSI Y14.5-1982.
2. Dimension “D” does not include mold flash , protrusions or gate burrs. Mold Flash, protrusion or gate
burrs shall not exceed 0.15mm (0.006 in) per side.
3. Dimension “E” does not include interlead flash or protrusions. Interlead flash or protrusions shall not
exceed 0.25 mm (0.010 in) per side.
4. The chamfer on the body is optional. It is not present, a visual index feature must be located within
the crosshatched area.
5. “L” is the length of the terminal for soldering to a substrate.
6. “N” is the number of terminal positions. (N=28)
7. The lead width “B” as measured 0.36 mm (0.014 in) or greater above the seating plane, shall not
exceed a maximum value of 0.61 mm (0.24 in).
8. Controlling dimension: MILLIMETER.
9. Refer to JEDEC MS-013 Variation AE
JEDEC is the trademark of the JEDEC SOLID STATE TECHNOLOGY ASSOCIATION
PT6315-S V1.9
- 20 -
September, 2005