PT6315 Datasheet, PDF (12/26 Pages) Princeton Technology Corp – VFD Driver/Controller IC

VFD Driver/Controller IC
Tel : [phone]
Fax: [phone]
PT6315
COMMAND 4: DISPLAY CONTROL COMMANDS
The Display Control Commands are used to turn ON or OFF a display. It also used to set the pulse
width. Please refer to the diagram below. When the power is turned ON, a 1/16 pulse width is
selected and the displayed is turned OFF (the key scanning is stopped).
Figure 11: Display Control Settings
PT6315 v2.0
Page 12
Sep. 2002