PE83336_14 Datasheet, PDF (5/12 Pages) Peregrine Semiconductor – 3000 MHz UltraCMOS® Integer-N PLL

PE83336
Product Specification
Table 2. Absolute Maximum Ratings
Symbol Parameter/Conditions Min Max Units
V_DD
Supply voltage
V_I
Voltage on any input
I_I
DC into any input
I_O
DC into any output
T_stg
Storage temperature
range
-0.3 4.0
V
-0.3
V_DD
+ 0.3
V
-10 +10 mA
-10 +10 mA
-65 150
°C
Table 3. Operating Ratings
Symbol Parameter/Conditions Min Max Units
V_DD
Supply voltage
2.85 3.15
V
T_A
Operating ambient
temperature range
-55 125
°C
Table 4. ESD Ratings
Symbol
Parameter/Conditions
Level Units
V_ESD
ESD voltage (Human Body
Model)
1000
V
Note 1: Periodically sampled, not 100% tested. Tested per MIL-
STD-883, M3015 C2
Electrostatic Discharge (ESD) Precautions
When handling this UltraCMOS^® device, observe
the same precautions that you would use with
other ESD-sensitive devices. Although this device
contains circuitry to protect it from damage due to
ESD, precautions should be taken to avoid
exceeding the specified rating in Table 4.
Latch-Up Avoidance
Unlike conventional CMOS devices, UltraCMOS^®
devices are immune to latch-up.
Table 5. DC Characteristics: V_DD = 3.0 V, -55° C ≤T_A ≤125° C, unless otherwise specified
Symbol
Parameter
Conditions
Min
Typ
Operational supply current;
I_DD
Prescaler disabled
Prescaler enabled
V_DD = 2.85 to 3.15 V
10
20
Digital Inputs: All except f_r, R₀, F_in, F_in
V_IH
High level input voltage
V_DD = 2.85 to 3.15 V
0.7 x V_DD
V_IL
Low level input voltage
V_DD = 2.85 to 3.15 V
I_IH
High level input current
V_IH = V_DD = 3.15 V
I_IL
Low level input current
V_IL = 0, V_DD = 3.15 V
-1
Reference Divider input: f_r
I_IHR
High level input current
V_IH = V_DD = 3.15 V
I_ILR
Low level input current
V_IL = 0, V_DD = 3.15 V
-100
R0 Input (Pull-up Resistor): R₀
I_IHRO
High level input current
V_IH = V_DD = 3.15 V
I_ILRO
Low level input current
V_IL = 0, V_DD = 3.15 V
-5
Counter and phase detector outputs: f_c, f_p, PD_D, PD_U
V_OLD
Output voltage LOW
I_out = 6mA
V_OHD
Output voltage HIGH
I_out = -3mA
V_DD - 0.4
Lock detect outputs: Cext, LD
V_OLC
Output voltage LOW, Cext
I_out = 100µA
V_OHC
V_OLLD
Output voltage HIGH, Cext
Output voltage LOW, LD
I_out = -100µA
I_out = 6mA
V_DD - 0.4
Max
28
Units
mA
mA
V
0.3 x V_DD
V
+70
µA
µA
+100
µA
µA
+70
µA
µA
0.4
V
V
0.4
V
V
0.4
V
Document No. 70-0137-05 │ www.psemi.com
©2010-2012 Peregrine Semiconductor Corp. All rights reserved.
Page 5 of 12
Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com