EPR-93 Datasheet, PDF (6/40 Pages) Power Integrations, Inc. – Engineering Prototype Report for EP 93 - 32 W/81 W Peak Supply Using PeakSwitch- (PKS606Y)

EP-93 – 30 V, 1.07 A, 2.7 A (peak), Universal Input Supply
22-Jun-2006
2 Power Supply Specification
Description
Symbol
Input
Voltage
V_IN
Frequency
f_LINE
No-Load Input Power (230 VAC)
Output
Output Voltage
Output Ripple Voltage
Output Current
Total Output Power
V_OUT1
V_RIPPLE1
I_OUT1
Continuous Output Power
Peak Output Power
Efficiency
Full Load
P_OUT
P_{OUT_PEAK}
η
Required average efficiency at
25, 50, 75 and 100 % of P_OUT
η_CEC
Environmental
Conducted EMI
Safety
Surge
Surge
Ambient Temperature
T_AMB
Min Typ Max Units
90
265 VAC
47 50/60 64
Hz
0.2
W
27 30 33
V
400 mV
0 1.07 2.71 A
32
W
81
W
82
%
80.2
%
Meets CISPR22B / EN55022B
Designed to meet IEC950, UL1950
Class II
1 (D)
2 (C)
kV
1 (D)
2 (C)
0
kV
50
o_C
Comment
2 Wire – no P.E.
± 10%
20 MHz bandwidth
Measured at P_OUT, 25 ^oC
Per California Energy Commission
(CEC) / ENERGY STAR
requirements
1.2/50 µs surge, IEC 1000-4-5,
Series Impedance:
Differential Mode (D): 2 Ω
Common Mode (C): 12 Ω
100 kHz ring wave, 500 A short
circuit current, differential (D) and
common mode (C)
Free convection, sea level
Power Integrations
Tel: [phone] Fax: [phone]
www.powerint.com
Page 6 of 40