EPR-93 Datasheet, PDF (34/40 Pages) Power Integrations, Inc. – Engineering Prototype Report for EP 93 - 32 W/81 W Peak Supply Using PeakSwitch- (PKS606Y)

EP-93 – 30 V, 1.07 A, 2.7 A (peak), Universal Input Supply
22-Jun-2006
15 Conducted EMI
For the measurements shown below, the power supply was resistively loaded to 32 W
and attached to the LISN via a 2-meter IEC line cord arranged in a serpentine pattern.
The power supply secondary return was hard-wired to the LISN ground using a 1-meter
cable.
Figure 37 – Conducted EMI, Maximum Steady State Load, 115 VAC, 60 Hz, and EN55022 B Limits.
Power Integrations
Tel: [phone] Fax: [phone]
www.powerint.com
Page 34 of 40