HZZ00101 Datasheet, PDF (9/9 Pages) Power-One – Cassette Style Mating Connectors

Accessories
Cassette Style Mating Connectors H11, H15, H15S2, H15S4
Cable Hood
A cable connector housing or cable hood is available for all
female H15, H15S2 and H15S4 type connectors with faston
terminals (not suited for screw terminals). It serves as a
strain relief, isolates connections and protects cables.
Item number: KSG-H15/H15S4
Reference:
HZZ00141
Delivery content: Housing shell, cable duct with covers,
cable clip, cable boot and screws
European
Projection
20.2
If using the cable hood together with retention clips, a
special version is available, where both sides of the hood
are slightly modified in order to allow for insertion of the
clips. The cable hood with retention clips has been tested to
withstand vibrations according to IEC/EN 60068-2-6: 5 g,
7.5 h (2.5 h per axis).
Item number: KSG-H15/H15S4-V
Reference:
HZZ00142
Delivery content: Housing shell, cable duct with covers,
cable clip, cable boot and screws
Modification for use with Retension Clip
110
Fig. 18
Cable hood for H15 and H15S4 connectors
Cable Hood Retention Brackets CHRB
The cable hood can also be fixed to the converter case
with two U-shaped cable hood retention brackets.
Available for H, M, K, PSK, PSS, PSL, S, T series.
Item number: CHRB-KSG
Reference:
HZZ01218
Delivery content: 2 brackets with 2 screws
Fig. 19
Cable hood retention bracket CHRB
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical
components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written
consent of the respective divisional president of Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending
on the date manufactured. Specifications are subject to change without notice.
SEP 29, 2003 revised to MAY 24, 2006
Page 9 of 9
www.power-one.com