PL611S-08 Datasheet, PDF (4/8 Pages) PhaseLink Corporation – Low-Power Programmable Quick Turn ClockTM

P (Preliminary) L611s-08
Low-Power Programmable Quick Turn Clock^TM
ELECTRICAL SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
PARAMETERS
SYMBOL
MIN.
MAX.
UNITS
Supply Voltage Range
Input Voltage Range
Output Voltage Range
Soldering Temperature (Green package)
VDD
-0.5
7
V
VI
-0.5
VDD+0.5
V
VO
-0.5
VDD+0.5
V
260
°C
Data Retention @ 85°C
10
Year
Storage Temperature
Ambient Operating Temperature*
TS
-65
150
°C
-40
85
°C
Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permanent damage to the device
and affect product reliability. These conditions represent a stress rating only, and functional operations of the device at these or any other conditions above
the operational limits noted in this specification is not implied. *Operating temperature is guaranteed by design. Parts are tested to commercial grade only.
AC SPECIFICATIONS
PARAMETERS
CONDITIONS
Crystal Input Frequency (XIN) Fundamental Crystal
Input (FIN) Frequency
Reference Clock
Input (FIN) Signal Amplitude Internally AC coupled (High Frequency)
Input (FIN) Signal Amplitude
Internally AC coupled (Low Frequency)
3.3V <50MHz, 2.5V <40MHz, 1.8V <15MHz
@ VDD =3.3V
Output Frequency
@ VDD =2.5V
@ VDD =1.8V
Settling Time
At power-up (after VDD increases over 1.62V)
Output Enable Time
OE Function; Ta=25º C, 15pF Load
PDB Function; Ta=25º C, 15pF Load
VDD Sensitivity
Frequency vs. VDD +/-10%
Output Rise Time
15pF Load, 10/90% VDD, High Drive, 3.3V
Output Fall Time
15pF Load, 90/10% VDD, High Drive, 3.3V
Duty Cycle
PLL Enabled, @ VDD /2
Period Jitter,Pk-to-Pk*
(measured from 10,000
samples)
With capacitive decoupling between VDD and
GND.
* Note: Jitter performance depends on the programming parameters.
MIN. TYP. MAX. UNITS
10
50
MHz
1
100
MHz
0.9
VDD
Vpp
0.1
VDD
Vpp
MHz
75
MHz
MHz
2
ms
10
ns
2
ms
-2
2
ppm
1.2
1.7
ns
1.2
1.7
ns
45
50
55
%
70
ps
47745 Fremont Blvd., Fremont, California 94538 Tel [phone] Fax [phone] www.phaselink.com Rev 12/12/06 Page 4